A wooden sofa cover 3 seater set is really six cushion covers: three for the seat gaddis and three for the back cushions, because the wooden frame itself stays bare and polished. So you measure each cushion, not the sofa.
Below, first the measuring method, then nine designs: zipper covers, stretch covers and printed or cotton covers. For frame styles see wooden sofa set designs, and for new foam and cushion sizes see sofa cushion designs.
How to Measure Each Wooden Sofa Cushion
- Take every cushion out and lay it flat.
- Measure length, width and thickness of each. A typical seat gaddi measures 20 to 24 inches deep, 4 or 5 inches thick; back cushions are thinner.
- Note the shape: square, rectangle or curved backs.
- Write sizes on masking tape on each cushion.
- For zip covers, give the tailor exact sizes and ask for a half inch of ease so the cover closes without straining.
| Sofa | Seat covers | Back covers | Total |
|---|---|---|---|
| 3 seater | 3 | 3 | 6 |
| 3+1+1 | 5 | 5 | 10 |
| 3+2 | 5 | 5 | 10 |
Some 3 seaters use one long bench gaddi instead of three; count what you have.
Picking the Best 3 Seater Wooden Sofa Cover with Zip
- Zip: nylon coil zips, at least three sides long, at the back face.
- Fabric: 25,000 rubs or above for daily family use; cotton canvas, poly cotton or jacquard.
- Piping: keeps edges sharp and shows the cushion shape.
- Colour: lighter covers on dark sheesham, deeper colours on golden teak or light mango wood.
- Damp: in the monsoon, take covers off once a fortnight to air the foam, and wipe the polished frame down with soft dry cotton.
See teak wood sofa and sheesham sofa pages for frames.
Wooden Sofa Cover 3+1+1 Seater with Zipper
Zip covers fit like a glove and come off for washing. A 3+1+1 set has ten pieces in most cases: six for the 3 seater and two for each single.
- Seats
- 3 seater, 6 covers
- Build
- Teak, cotton blend
- Fits
- Living room
A 3 seater wooden sofa cover with zip in beige cotton blend, piped edges and a zip on the back face of each cushion.
Maker's note: Ask for the zip on three sides of the back face; a one side zip makes pushing foam in a fight.
- Seats
- 3+1+1, 10 covers
- Build
- Sheesham, polyester
- Fits
- 12 x 14 ft hall
Mid grey zipped covers on a sheesham 3+1+1 set. The grey sits calmly against the dark streaky grain.
Maker's note: Number each cover and cushion with a tag inside; single seat cushions differ by an inch or two.
- Seats
- 3 seater
- Build
- Mango wood, velvet
- Fits
- Drawing room
Olive velvet zip covers on a light mango wood frame for a richer look in a drawing room.
Maker's note: Velvet covers need a lining stitched in; without it the pile wears through at the seat front.
Stretch Covers for Wooden Sofa Cushions
Stretch cushion covers slip over each gaddi and grip it with an elastic edge. A ready stretch pack is the fastest way to refresh a full set with no tailor.
- Seats
- 3 seater
- Build
- Rubberwood, stretch
- Fits
- Rented flat
Dusty rose stretch knit covers over every seat and back gaddi. The elastic edge hides under the cushion.
Maker's note: Buy stretch cushion covers by thickness; a 5 inch gaddi will not fit a 3 inch cover.
- Seats
- 3+1+1
- Build
- Teak, jacquard
- Fits
- Family hall
A stretch jacquard pack for a full 3+1+1 wooden sofa set cover in taupe. The woven texture hides creases.
Maker's note: Count your gaddis first; some single seaters have a seat cushion only and no back cushion.
- Seats
- 3 seater, seats only
- Build
- Teak, cane, stretch
- Fits
- Kerala style hall
Only seat covers here: a cane back sofa has no back cushions. Grey stretch covers protect the gaddis from sweat in summer.
Maker's note: For cane backs, add a thin back cushion with ties so the cane does not press into the spine.
Printed and Cotton Wooden Sofa Cover 3 Seater Sets
Cotton is the cool choice for wooden sofas in hot cities. Prints hide everyday marks; plain cotton is easier to match with curtains.
- Seats
- 3 seater
- Build
- Sheesham, cotton
- Fits
- Summer home
Indigo and white printed cotton covers on a dark sheesham frame. The print hides tea marks and the cotton stays cool.
Maker's note: Pre wash the cotton before stitching; it shrinks a little and covers stitched dry end up tight.
- Seats
- 3+1+1
- Build
- Teak, cotton canvas
- Fits
- Joint home
Plain mustard cotton with cream piping on a teak frame. A simple wooden sofa cover set that suits most wall colours.
Maker's note: Choose canvas or duck weave cotton for seats; thin cotton wears through in months.
- Seats
- 3 seater
- Build
- Mango wood, cotton
- Fits
- Modern flat
A small black and white geometric print on a light wood sofa. It gives a modern look to a plain frame.
Maker's note: Keep the print small and the cushions plain on the back face if you flip them often.
Questions buyers ask
For a 3+1+1 wooden set, how many covers come in the pack?
Usually ten: three seat and three back covers for the 3 seater, and one seat and one back cover for each single. Sets without back cushions have five.
Is a stretch or zip cover better for a 3 seater wooden sofa cover?
Zip covers fit better and last longer. Stretch covers are quicker and suit rented homes. If cushions are odd sizes, go with zip covers stitched to measure.
Can I use a normal 3 seater sofa cover on a wooden sofa?
No. Normal sofa covers wrap the whole sofa including arms. A wooden sofa needs cushion covers only, since the frame shows. See the sofa cover guide for full covers.
Which colour wooden sofa set cover works with dark wood?
Light colours like beige, ivory, grey and sage stand out against dark sheesham or walnut polish. Mustard, rust and teal suit golden teak.
How do I stop covers from slipping on a wooden sofa seat?
Put an anti slip mat between the seat board and the gaddi. Zip covers stay put better than loose stretch covers.
How should I wash wooden sofa cushion covers?
Unzip, pull the foam out, then wash the covers cool and gentle. Shade dry them and refit only once bone dry, so the foam stays free of damp.